This particular version of the Aqua has the highest rating of each model’s depth of the current aqua collection, but this is not the first CBI estimated at 2,000 M. The first was the ocean 2000, which was made in 1982 Despite the extreme specified depth a collaboration with Porsche Design, the watch – as the first watch with a titanium case and bracelet – was not particularly large, 42 mm x 12, 6 mm; It is not a dress to see by any means, but still not very robust modern standards.
IWC Aquatimer Automatic 2000 is, however, that you have no doubt about its hardness. It is 46mm x 20.5mm, while the SafeDive telescope system probably includes some additional weight and thickness. SafeDive The system consists of an outer ring, inner lining to be rotated by an internal passage; The idea is to combine easy operation of an external bezel with the legibility of an inner bevel.
A dive watch with a system of SafeDive is actually very similar to the construction of a modern submarine – submarines, usually have an outer shell, which provides a good simplification and rationalization, and a helmet of the inner pressure areas provides the life and the Work of the crew. Similarly, the SafeDive system includes an outer housing (the outer enclosure being mounted), the inlet and outlet of water, and an inner housing which is responsible for protecting the movement. The outgoing at 9:00 is recording the coupling mechanism to connect the inside and outside shows.
Domed sapphire crystal is clearly visible above the telescope, whose design reflects the IWC Ocean 2000 of at least 3-4 mm, and of course, the movements used in the original 2000 and 2000 meters of aqua ocean are quite different. 2000 ocean callus used to the CBI. 3752 (related to the ETA 2892 movement), which is slightly thinner than the IWC cal. 80,110 in this aqua.
The 80110 caliber was launched in 2005 in the new engineering engine and is 30mm x 7.26mm, including the IWC Pellaton lift. It is a little thicker than the ETA 2892 3.6mm thick, but probably a more robust option for a technical dive watch.
Now talk, in depth. Each meter of water brings additional pressure above the atmospheric pressure at sea level; The exact amount is an additional 1,422 pounds per square meter per meter. High quality replica IWC Aquatimer watches report!
The deeper you get, the more difficult the water grows on you. The professional association of dive instructors (PADI) recommends 30 meters as a limit for scuba diving when the pressure is 42.67 psi. If you breathe normal air, which is mainly nitrogen and oxygen, your body will absorb additional nitrogen than nitrogen is already compressed in your body . On the surface, which has dissolved about 1.5 liters of nitrogen in the blood and in body fluids; 10 meters, but (an atmospheric pressure) this double the value of three liters.
